This text has been translated by auto-translation. There may be a slight difference between the original text and the translation. (Original Language: 日本語)

Education / Lesson / Introduction

No Image

No installation required ・ Manned OK ！ Why not install a "UV-C indoor air sterilizer" ？?

Philips brand, 35 years of experience with UV-C lamps
Performance of sterilizing more than 99% of 10 m3 air in about 1 hour from the start of use ！

No installation work is required, so it can be installed not only in businesses but also in ordinary homes.

Draws in room air from the lower intake port
Blows out air sterilized by the UV-C lamp from the top.

[High sterilization performance]
When operated for 2 hours in a room of 80 m3, the sterilization rate is over 98%.
（ 80㎥ ＝ Assuming a room height of 2.5m, about 20 tatami mats （ 32㎡ ）
*Fan speed is max 550㎥ ／ h

[Easy-to-use operation panel]
Simple
30 min ／ 60 min ／ 120 min ／ Constant operation timer with simple button operation.
Fan speed can also be adjusted in 3 steps.

*Installation Precautions Flame Detector （ UV Detection Type ） Reacts to
weak UV-C in a space with a flame detector Please check before installation.

Please feel free to contact
Top System Limited (0438-62-6715Please mention [Vivinavi])
for product details.

https://www.e-topsystem.com/
Send Message
[Contact]

Internal Infrastructure Development ・ Leave it to Top System for maintenance ！ ！ Please feel free to contact us.

  • Posted : 2024/04/22
  • Published : 2024/05/15
  • Changed : 2024/04/22
  • Total View : 190 persons
Web Access No.1796369
  • Share
“Hot List” Go back to top